Composite side guards. Uses 4 mounting points instead of typical 3 of other brands. Set of two (left / right). 

13-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine. 

14-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine. 

15-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine. 

3-pin flywheel made from aluminum. 

Tapered collar for mounting flywheel to engine crankshaft. 

Tough steel nut for securing flywheel to engine crankshaft. Made from famous HUDY Spring Steel. 

CNC-machined aluminum clutch shoes. Set of 3. 

These new 1.71g clutch shoes are slightly lighter than the stock aluminum shoes, allowing the engine to spool up a bit more before the shoes grab the flywheel. The end result is a clutch that will engage later in the powerband giving more rip out of the corners.  

Steel clutch springs. Wire diameter 0.9mm (soft) for earlier clutch engagement. Set of 3. 

Steel clutch springs. Wire diameter 1.0mm (hard) for later clutch engagement. Set of 3. 

Steel clutch springs. Wire diameter 1.1mm (hard) for later clutch engagement. Set of 3. 

Factory preassembled 120cc fuel tank set. The fuel tank includes an integrated stone filter and splashguard to protect the brakes from fuel. 

Molded composite mounting posts for fuel tank. Set of 2. 

Soft rubber mounting grommets for fuel tank absorb vibrations. Set of 4. 

High grade CNC-machined engine mounts help to dissipate engine heat, black anodized and then milled to create the stylish XRAY luxury look. 

Adjustable engine mount CNC-machined from premium lightweight aircraft aluminum with XRAY sylish black finish and silver edging. The engine mount consists of two pieces: the adjustable bottom mount is affixed to the chassis while the upper mounts are attached to the engine. 

Adjustable engine mount CNC-machined from premium lightweight aircraft aluminum with XRAY sylish black finish and silver edging. The engine mount consists of two pieces: the adjustable bottom mount is affixed to the chassis while the upper mounts are attached to the engine.  

Shims for attaching engine mounts to chassis using flat-head screws. Set of 4. 

Set of 2 single-piece engine mounts CNC-machined from premium lightweight aircraft aluminum, with XRAY stylish black finish and silver edging. The single-piece mounts fit Novarossi, GRP, RB, Max, JP, and Sirio engines. To be used with the Adjustable Engine Mount. 

Set of 2 single-piece engine mounts CNC-machined from premium lightweight aircraft aluminum, with XRAY stylish black finish and silver edging. The single-piece mounts fit Picco, Mega, Orion, LRP and OS engines. To be used with the Adjustable Engine Mount. 

Exhaust wire mount set includes mounting wire, composite support, and all necessary hardware. 

High-performance clutch bell ball-bearings 5x10x4. Packed with grease specially made for clutch bell. Qty of 2. 

M4x5 setscrew, hex drive. Set of 10 pieces. 

M3x8 button-head machine screw, hex drive. Set of 10 pieces. 

M3x16 button-head machine screw, hex drive. Set of 10 pieces. 

M3x10 flat-head machine screw, hex drive. Set of 10 pieces.
 

M4x10 flat-head machine screw, hex drive. Set of 10 pieces.

 

M3x12 socket-head cap screw, hex drive. Set of 10 pieces. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 5x10x4. Set of 2 pieces. 

Flat washer, 2.5mm ID. Set of 10 pieces. 

Flat washer. ID x OD x thickness = 5mm x 10mm x 1mm. Set of 10 pieces. 

Flat washer. ID x OD x thickness = 7mm x 12mm x 0.2mm. Set of 10 pieces. 

Flat washer. ID x OD x thickness = 7mm x 12mm x 0.3mm. Set of 10 pieces. 

Flat washer. ID x OD x thickness = 7mm x 12mm x 0.5mm. Set of 10 pieces.